| Date |
Time |
Component |
Description |
|
| 10/08/2013 | 14:46:46 | | Deactivate 3 macros that are not longer needed once thruster firing has been disabled |
|
| 01/16/2013 | 16:59:10 | | This activates the power toggle, Macro 10, and will leave the SBUV powered, which is the upper temp macro was previously enabled for protection |
|
| 01/16/2013 | 16:58:50 | | This deactivates Macro 13 |
|
| 01/16/2013 | 16:57:56 | | Disable Macro 4B |
|
| 01/16/2013 | 16:56:34 | | This will load MACRO 4C to the control and non control CPU |
|
| 01/16/2013 | 16:54:45 | | This will load MACRO 4B to the control and non control CPU |
|
| 01/03/2013 | 14:13:27 | | Determine which macro is currently active in the toggle by reviewing the current temperature of NSBUCMTR and the macro page to see what macro is active.
If macro 15 is active perform this and the following command |
|
| 01/03/2013 | 14:13:00 | | Load the new macro 13 to both the control and no control CPU |
|
| 01/03/2013 | 14:11:10 | | Delete the current macro 13 from the non control CPU |
|
| 01/03/2013 | 14:11:02 | | Delete the current macro 13 from the control CPU |
|
| 10/18/2011 | 16:07:53 | | Loads safety macros for ESTX MIMU2 test (0043 - 0046) |
|
| 09/19/2011 | 14:42:58 | | Load safety macros for ESTX MIMU1 Test (40, 41, 42, 47) |
|
| 04/17/2011 | 15:42:50 | | Deactivate safety macros for BYAWERR |
|
| 04/16/2011 | 22:27:23 | | Load and activate safety macros for BYAWERR |
|
| 07/15/2008 | 15:34:00 | | Activate CPU Macro 11 - SBUV Motor Power Toggling Under Temperature Control |
|
| 07/15/2008 | 15:32:05 | | Load CPU Macro 14 - SBUV Motor Turn Off at 40 C, activate CPU Macro 13. |
|
| 07/15/2008 | 15:30:28 | | Load CPU Macro 13 - SBUV Motor Toggle On at 24 C, activate CPU Macro 14. |
|
| 07/15/2008 | 15:28:32 | | Load CPU Macro 12 - SBUV Motor Turn Off at 40 C, activate CPU Macro 11. |
|
| 07/15/2008 | 15:26:39 | | Load CPU Macro 11 - SBUV Motor Toggle On at 21 C, activate CPU Macro 12. |
|
| 12/31/2005 | 23:30:00 | CPU 2 | Substract 1.5 second (1500 msecs) from spacecraft command clock CONTROL side to compensate for leap second on 1 Jan 06 and general drift throughout the year. |
|
| 12/31/2005 | 22:30:00 | CPU 1 | Substract 1.5 second (1500 msecs) from spacecraft command clock NON-CONTROL side to compensate for leap second on 1 Jan 06 and general drift throughout the year. |
|
| 07/20/2005 | 19:45:00 | | Removes previous CPU telemetry table change on SCP 1. (Error angles were replaced with MIMU raw telemetry) |
|
| 07/19/2005 | 13:30:00 | | Replaces Euler attitude angle errors in SCP1 cpu telemetry table 1 with MIMU raw gyro data. |
|
| 06/09/2005 | 12:00:00 | | Operational responsibility for N18 passes to NOAA from NASA |
|
| 05/23/2005 | 15:21:00 | RXO 1 | RXO commanded to normal (primary selected). |
|
| 05/20/2005 | 11:50:00 | CIU | on orbit |
|
| 05/20/2005 | 11:50:00 | CPU 1 | on orbit, non control side |
|
| 05/20/2005 | 11:50:00 | CPU 2 | on orbit, control side |
|
| 05/20/2005 | 11:50:00 | CXU | on orbit |
|
| 05/20/2005 | 11:50:00 | RXO 1 | on orbit |
|
| 05/20/2005 | 11:50:00 | RXO 2 | on orbit |
|
| 05/20/2005 | 11:50:00 | SCU | on orbit |
|
| 05/20/2005 | 11:15:30 | | on orbit |
