Topic: S-NPP CERES FSW Patch Upload planned for Tuesday,
08/28/2018
Date/Time Issued: August 27, 2018 1725Z
Products or Data Impacted: All CERES Science Data
Date/Time of Initial Impact: August 28, 2018 15:41:02Z
Date/Time of Expected End: August 28, 2018 17:36:02Z
Length of Outage: 2 orbits
Details/Specifics of Change:
On August 28, 2018, S-NPP CERES FM5 will be commanded into
Diagnostic and Standby Mode to permit the upload of new FSW PROM
Dump2 that Langley Research Center (LaRC) requested. This FSW patch
that contains a modified instrument sequence for slot thirteen which
was previously unused.
This new FSW will help LaRC verify the health of the onboard
instrument PROM chips to ensure they haven't been damaged by space
weather. This will also help to set the PROMs to the default
configuration in case of an unexpected instrument reset. CERES will
produce the Diagnostic APID while in Diagnostic and Standby Modes,
including during the Memory Dump.
SNPP Svalbard 35416 15:41:02Z - 15:53:46Z CERES will be commanded
to Diagnostic Mode, FSW memory loaded, commanded to Stanby, and
commanded to perform a RAM Dump that will continue to perform past
LOS time.
SNPP Svalbard 35417 17:24:51Z - 17:36:02Z CERES commanded to
Crosstrack mode and restored to nominal operations.
Contact Information for Further Information:
ESPC Operations at ESPCOperations@noaa.gov
and 301-817-3880
Web Site(s) for applicable information: N/A
This message was sent by ESPC.Notification@noaa.gov.
You have been sent this and other notifications because you have
opted in to receive it. If for any reason, you wish to
unsubscribe, please contact ESPC Help Desk at ESPCOperations@noaa.gov
or (301) 817-3880. Please note: it may take up to two business
days to process your unsubscribe request.