Topic: Eumetsat Weekly Operations Schedule - Week 11 Issue 6 (Announcements: Addition of 6802)
 
 Date/Time Issued: March 17, 2021 1558Z
 
 Product(s) or Data Impacted: See list below.
 
 Date/Time of Initial Impact: March 17, 2021 1548Z  (from the Eumetsat Weekly Operations Schedule message)
 
 Date/Time of Expected End:  See table in detail for on and off switch  time  
 
 Length of Outage:  N/A
 
 Details/Specifics of Change:    
Message number: 7746
Message creation: Wed Mar 17 15:48:43 UTC 2021


Type: Planned Maintenance
Ann Nr: 6802
Rev: 1
Start Time: 2021-03-18 14:00:00.0
End Time: 2021-03-18 18:00:00.0
Subject: ground-segment-maintenance
Impact: risk-of-interruption
Detail: Due to planned maintenance activities at IPMA facilities, there is a high risk of outages and/or delays for the LSA SAF MSG products during the maintenance period.
Status: scheduled
Issue Time: 2021-03-17 15:10:06.0
Services: LSA SAF - Products

Name: EUMETSAT
Address: Eumetsat-Allee 1
D-64295 Darmstadt
Germany
Telephone: +49 6151 807 3660/3770
Fax: +49 6151 807 3790
E-mail: ops@eumetsat.int
Internet: www.eumetsat.int

You are receiving this email because you are subscribed to our User Notification Service (UNS). You can modify your UNS subscriptions or unsubscribe at any time via our UNS web interface (login to our Earth Observation Portal required).

Any email message from EUMETSAT is sent in good faith but shall neither be binding nor construed as constituting a commitment by EUMETSAT, except where provided for in a written agreement or contract or if explicitly stated in the email. Please note that any views or opinions presented in this email are solely those of the sender and do not necessarily represent those of EUMETSAT. This message and any attachments are intended for the sole use of the addressee(s) and may contain confidential and privileged information. Any unauthorised use, disclosure, dissemination or distribution (in whole or in part) of its contents is not permitted. If you received this message in error, please notify the sender and delete it from your system.